AMPLIFICADOR
YAMAHA
A-S300
60 Watts x 2
---
Amplificador Integrado de Audio Hi Fi, 60 Watts por canal a 8 ohms, capacidad de manejo de baja impedancia, salida para subwoofer activo, conexión para el iPod vía la base mod. YDS 10, 11 y 12, controles sencillos.
DESCRIPCION
-
Potencia de salida de 60 Watts por canal a 8 ohms.
-
Tecnología ToP ART.
-
Panel Frontal de Aluminio
-
Frecuencia de Respuesta de 10 Hz a 100 Khz
-
Capacidad de Manejo de baja Impedancia desde 8 hasta 4 ohms
-
Capacidad de Entradas y Salidas: 6 / 2
-
Conectividad para Subwoofer Activo, no importa la capacidad del Subwoofer.
-
Potencia Dinámica por canal (8/6/4/2 Ohms), 100 / 120 /140 / 150 W
-
Conectividad con el iPod / iPhone, vía la base YDS – 12 y anteriores.
-
Consumo en posición de espera (ó stand by): 0.5 W
-
Control Remoto para todos los equipos de Yamaha, no importa la generación.
-
Color disponible: Únicamente en Negro.
Pure Direct
Music signals travel the shortest possible route, bypassing the buffer amp and tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality.
Highest Quality Parts
The quality of each individual part, as well as how they work together, basically determines the sound quality of any component. Yamaha uses only very high quality parts, carefully selected and tested.
New Speaker Terminals
These high grade speaker terminals have silver plating for best connection and outstanding durability. The pitch between jacks is wider for easier insertion.
Dual aluminium-extruded heat sinks
Dual aluminium-extruded heat sinks ensure effective heat dissipation and help achieve crisp, clean sound.
Continuously Variable Loudness Control
Our ears lose sensitivity to high and low frequencies at low volume levels. This control lets you turn down the volume while maintaining the optimum frequency response.
Special Power Supply for Clear iPod Sound
The iPod dock has an independent power supply to prevent operating or charging current from the iPod from flowing into the amp ground signal. This ensures optimum iPod sound quality.
Balanced System for Minimal Noise
An unbalanced interface is subject to commonmode voltage noise, so Yamaha uses a balanced system to receive the iPod signal. This makes a significant contribution to reducing noise in the system for higher sound quality.
Subwoofer Out
Subwoofer Out lets you connect a subwoofer for stronger bass and better overall sound quality.
ToP-ART
When processing and transmission of the audio signal is simple and direct there is less chance of it being affected by noise and distortion. Yamaha’s amplifier design technology called ToP-ART (Total Purity Audio Reproduction Technology) features I/O (input to output) Direct Symmetrical Design, with left and right channels organized in a straight, symmetrical layout for highest signal purity.
Auto PowerOff
Auto Power Off iPower Managementj automatically turns off the power after a certain amount of time to save energy.
ESPECIFICACIONES
|
Standby Power Consumption |
0.5 W |
|
Power Management (Auto Power Off) |
Yes (6 hours) |
|
Minimum RMS Output Power (8 ohms, 20 Hz-20 kHz) |
60 W + 60 W (0.019% THD) |
|
Maximum Power (4 ohms, 1kHz, 0.7% THD, for Europe) |
95 W + 95 W |
|
Pure Direct |
Yes |
|
Total Harmonic Distortion (CD to Sp Out, 20 Hz-20 kHz) |
0.015% (30 W/8 ohms) |
|
High Dynamic Power/Channel (8/6/4/2 ohms) |
100/120/140/150 W |
|
Signal-to-Noise Ratio (CD) |
100 dB (Pure Direct On, 200 mV) |
|
Frequency Response |
10 Hz-100 kHz ±1 dB |
|
Dimensions (W x H x D) |
435 x 151 x 387 mm |
|
Weight |
9 kg |
|
Audio In / Out |
6 / 2 |
|
Subwoofer Out |
Yes |
Tu mensaje fue enviado